Biopuremax™ is a company focused on water systems in the pharmaceutical and biotech industries.
Biopuremax™ has over 20 years of experience in the design, installation, validation and operation of high quality Biopharmaceutical water systems.

Up to 30% savings
on feed water.

Actively reduces bacteria to
very low levels before feed
to the RO.

Simple to use;
Easy to maintain;
Exceptionally reliable.

Environmentally friendly,
Completely Green
Technology.

Low operational cost,
greater efficiency.

Exceeding USP, EP and JP standards.
Biopuremax™ unit can be designed to fit
any water treatment system capacity
Biopuremax™ system is manufactured
according controlled procedures and after costumer design approval
Wet Factory Acceptance Test performed
per a pre-approved protocol 
The system is based on pretreatment and
production skids that can be quickly installed and connected to utilities
Biopuremax™ systems are supplied with full
SAT/commissioning package
Full validation package for the system
available
 
                                 
                                    Biopuremax Pretreatment– 1.0 m3/hr (2 gpm)
Double pass RO, PW product – 0.5 m3/hr (1.5 gpm)
 
                                 
                                    Biopuremax Pretreatment and RO
Production of RO water quality – 0.5 m3/hr (2.2 gpm)
 
                                 
                                    Biopuremax Pretreatment– 5.0 m3/hr (22 gpm)
Single pass RO, PW product – 3 m3/hr (13 gpm)
 
                                 
                                    Biopuremax Pretreatment– 9.5 m3/hr
Double pass RO/CDI, PW product – 4.5 m3/hr
Thermo Compression Distillation Unit – 3 m3/hr
WFI Storage and distribution systems – 30 m3
 
                                 
                                    Biopuremax Pretreatment– 4 m3/hr
Single pass RO/CDI, PW product – 0.6 m3/hr
Single pass RO/CDI, PW product – 0.6 m3/hr
WFI Storage and distribution systems – 3 m3
 
                                 
                                    Biopuremax Pretreatment– 4 m3/hr
Single pass RO/CEDI, PW product – 0.6 m3/hr
PW Storage and distribution systems – 2 m3
Hot PW distribution loops – Central cooling
 
                                 
                                    Biopuremax Pretreatment – 1.0 m3/hr
Single pass RO, PW product – 0.5 m3/hr
 
                                 
                                    Pretreatment multimedia and softeners – 25 m3/hr
Single stage RO/CEDI, Hot water sanitizable – 4 m3/hr
Six stage multi effect Distillation Unit – 1.6 m3/hr
WFI Storage systems – 20 m3
 
                                 
                                    Biopuremax Pretreatment– 1.0 m3/hr (2 gpm)
Double pass RO, WFI product – 0.5 m3/hr (1.5 gpm)